Floor polishing machine

Grinding,cleaning,polishing machine For concrete,marble,stone,granite,epoxy KDS motor from USA 2HP/175rpm/52kgs Use dry&wet

 Floor polishing machine JS-175A

Features:

1, Multifunctional: grinding, cleaning and polshing machine

2, Applicble for concrete, marble, stone, granite and epoxy floor surface

3, Use both dry and wet

4, High quality KDS brand motor imported from USA, assure high efficiency and long life

5, 2pcs of additional weight (30kgs)

6, Packed in with 18m cable, renovation disk, pin disk, brush disk

7, Suitable pads: PCD blade, diamond disk, metal pad, resin pad, renovation pad, wet polishing pad, abrasive paper, etc.

8, Planetary gearbox9, Metal handle to assure long life.Specification:

Model	Voltage	Output power	Revolution Speed	Frequency	Work Area	Disk	Tank capacity	Cable Length	Weight	Measurement
JS-175A	220V	2HP	175r.p.m	50Hz	d=420mm	1x420mm	11L	18M	52kgs	52x60x125H(cm)

Alternatives of this serie:

Model	Voltage	Output	Revolution	Frequency	Work Area	Disk	Tank capacity	Cable length	Weight	Measurement	Remarks
JS-175B	220V	2HP	175r.p.m	175r.p.m	d=450mm	1x450mm	11L	12M	53kgs	52x60x25H(cm)	plastic handgrip
JS-175C	220V	2HP	175r.p.m	50Hz	d=450mm	1x450mm	11L	12M	53kgs	12M	metal handgrip

 Note: JS-175B and JS-175C are available for 2.5HP/180r.p.m

Special Services:

OEM and ODM available

Others:

Origin: Shanghai , China

Minmum order quantity: 1 set

Packing: wooden case

Date of shipment: 3-10 days normally

Shipping port: Shanghai, China

Quantity discount: available

Photos:

catalogue photo

Real machine

Packed in with the machine:

One wire (18m for JS-175A,12m for JS-175B and JS-175C)

One bottom felt tool holder

One bottom brush disk

One bottom pin tool holder

Two pieces of weights (15kgs per piece)

Different Usin

Felt drive disk with metal-bond diamond tools

-- Metal diamond tools can be used for leveling the uneven, rough floor surface, and very abrasive surface. It is also intended for cut and removal of heavy old coatings such as paint, lacquer, epoxy, acrylic, and residues of adhesive and screed. Normally, it is especially suitable for thick grinding and removal of thick coatings.

 Felt tool holder with resin-bond diamond tools.

-- Resin-bond diamond tools are many times used after the use of metal-bond diamond tools for floor grinding and polishing, from diamond grit number 50 to 3000. The higher grit number, the finer polishing effects. However, in some cases a resin-bond diamond tool can be used as a starting tool on smooth flat floors. Normally, they are especially suitable for think grinding and polishing.

  

Brush disk for cleaning, washing the floor surface by removing the dirt and other adhesions 

Pin tool holder with polishing pads

Polishing pads for cleaning and polishing, and do crystalization using chemicals

Other photos:

Floor polishing machine